Components

DALI-2 Components at a glance

OSRAM delivers reliable and future-proof digital lighting control systems based on DALI-2 The great multi-vendor interoperability reduces commissioning effort.

The DALI-2 trademark and certification process are administered by the Digital Illumination Interface Alliance (DiiA). DiiA is an open, global consortium of lighting companies whose main aim is to grow the market for digital lighting-control solutions based on IEC 62386.

Connection

Components

All components match perfectly

With a full system approach, OSRAM delivers smart light management components from Basic to Professional.

The following products showcase one solution for a digital ceiling based on the DALI-2 standard. Multiple other component bundles are possible.

Let's discuss!

Connection

Components

DALI-2 Components at a glance

All components match perfectly

Linear CV Power supplies with DALI Oti DALI 80 TW Oti DALi 80 (4-channel)

The OSRAM constant voltage power supplies with DALI, enable you to maximize any design’s potential and enjoy flicker-free light due to a high PWM frequency, dimmable to between 0.1 and 100 % with TouchDIM. Use from 1 to 4 channels and benefit from DALI message detection of LED module failure. The slender form of these drivers makes them ideal for use when you need to install LED lighting in tight spaces or linear luminaires, for example in coves, corridors and handrails, or for wall washing. They are suitable for 24 V LED modules and for use with luminaires of protection classes I and II.

• Intelligent power matching thanks to Smart power supply
• LED driver whose output power can be shared arbitrarily among the 2 or 4 channels
• Dimming range: 0…100 %
• Line frequency: 0 Hz | 50 Hz | 60 Hz
• Slim form factor for mounting on the cove or in linear luminaires
• Minimized flicker thanks to high PWM frequency
• Suitable for installation in emergency lighting systems according to EN 60598-2-22
• Available as Tunable White version (DALI Device Type 8)
• DALI message detection "LED Module failure"
• IP rating: IP20

Explore More

Interface: KNX IF250 Powersupply: KNX PS 640

Interface: KNX IF250
Product family features

• Fully configured with the ETS Software and handles up to 250 group objects
• Powered via KNX Bus, no dedicated power supply necessary
• KNX programming interface according to KNXnet/IP specification
• LEDs show different work modes and communication errors on LAN and KNX Bus
• Buttons for diagnose functionality

Explore More

Powersupply: KNX PS 640
Product family features

Explore More

Push button: Manual control

DALI PRO PB Coupler

The DALI PRO PB Coupler, designed specifically for professional lighting installations, is a high performance pushbutton coupler with 4 floating inputs that can help you to achieve custom lighting concept and effects. It has many applications but is particularly good for classrooms, conference rooms, office lighting and production or assembly facilities, and can be installed in flush-type boxes. With the DALI PRO PB Coupler you can use standard pushbuttons or switches to activate the DALI instructions you desire, and it draws its power from DALI, so there is no need for any additional source. It can also be used with the DALI Professional or DALIeco light control systems.

Product family benefits
• Power supply from DALI
• Standard pushbuttons/switches can be used

Explore More

Sensor: DALI LS/PD CI

As part of the OSRAM DALI light management system (LMS), the DALI LS/PD LI compact light and presence sensor is easy to attach to luminaires and has a direct DALI connection. The light sensor has a working range of 20…800 lx (measured from the sensor) while the presence sensor uses a passive IR element. This sensor has a mounting height of 2…5 meters and you may find it particularly good for industrial lighting and office lighting. You can install the DALI LS/PD LI in ceilings using the matching LS/PD CI KIT or LS/PD AP KIT, and can adjust the presence detection angle between 40…90 ° with the integrated shutters. It is also suitable for use with both DALI Professional and DALIeco control units, and it comes with an attachable mounting frame for luminaire mounting from the inside and outside.

Product family features
• Mounting height: 2…5 m
• Presence detection via passive IR element
• Light sensor operating range: 20…800 lx (measured at sensor)
• Daylight-dependent regulation and presence-dependent control of light
• Direct connection to DALI
• Function indicator with two-color LED
• Ceiling installation adapter

Explore More