Using the web app, you can create a floor plan for the project on your PC or tablet – from a single room to an open-plan office. Predefined lighting control profiles, which can also be modified, can be assigned to individual zones. This work can be done in advance, which reduces the time required on site.

After the HubSense^® luminaires have been installed, the mobile app* is used for locating the luminaires via the RSSI filter and assigning them to the zones. The assignment of luminaires can be carried out by several installers at the same time.

If you want to change settings at the end of the installation, you can use the web and mobile app to adjust the parameters of the individual zones as required, e.g. daylight control, dimming levels or delay periods. A new zone assignment is also possible.